Phoenix backyard with a freeform pool, travertine deck and a desert mountain in the distance

Home / Cost guide

Pool resurfacing cost in Phoenix, 2026.

Most Phoenix-area pools land between about $4,000 for white plaster and $15,000 for pebble. Here is what moves the number, what else to budget for, and how to get a real price for yours.

Arizona ROC-licensed pros onlyUp to three quotes, not a call listFree for homeowners

We're a free matching service, not a contractor. The pros who quote you are licensed by the Arizona Registrar of Contractors, and you can check any license with the ROC before you hire.

Get your exact price

Step 1 of 3
Which finish are you thinking about?

For in-ground plaster, quartz or pebble pools. Not for fiberglass, vinyl or above-ground pools yet.

Free and no obligation. Takes about a minute.

The short answer

In the Phoenix area, white plaster typically runs about $4,000 to $8,000 and lasts 7 to 10 years. Quartz runs about $7,000 to $10,000 and lasts 12 to 18 years in Arizona. Pebble runs about $7,000 to $15,000 and often lasts 20 to 30 years.

Branded Pebble Tec lines often run higher, about $10 to $20 per square foot. See Pebble Tec prices by line and pool size. Redoing tile, coping and the deck too? See pool remodel costs. Just the deck? See pool deck resurfacing cost. Thinking of taking the pool out instead? Compare resurfacing with pool removal. Already have a quote? Here's how to check it.

Those ranges are for a typical Arizona backyard pool, which holds roughly 10,000 to 20,000 gallons. National cost guides run a little higher. Your price depends on size, prep and the extras below, which is why an on-site measurement from a licensed contractor is the only number to plan around.

What else to budget for

Common add-ons and their typical cost
ItemTypical costSource
Drain and cleanAbout $600 to $650National cost guide
Refill by hoseAbout $100 to $250Phoenix metro builder
Refill by water truckAbout $1,000 to $2,000Phoenix metro builder
Waterline tileAbout $25 to $30 per linear footPhoenix metro builder
CopingAbout $6 to $55 per linear foot, by materialNational cost guide
Acid wash insteadAbout $0.56 to $0.68 per square footNational cost guide

Get my exact price

Know your pool's size?

Get a range for your exact pool, with surface area, gallons and cost per year of each finish.

Open the calculator
Finishes and cost

Estimate your pool

Tap a finish and your pool size. The real price comes from the on-site quote.

Pool size
Pebble, average pool
$7,000 to $15,000
Get an exact price

Ballparks scale typical Phoenix-area 2026 ranges by pool size. Chip-out, tile and coping are quoted separately. Enter your exact pool size in the calculator.

What changes the price

Seven things that move your quote

Ask each contractor to itemize these so you can compare quotes line by line.

Pool size

Contractors price by interior surface area. Cost guides put plaster at about $6 to $8 per square foot, quartz at $7 to $10 and pebble at $7 to $15.

The finish

Plaster costs least, quartz sits in the middle and pebble costs most but usually lasts longest.

Prep work

A bond coat goes over the old surface. A full chip-out removes it and costs more, and it's needed when there are several old layers or widespread hollow spots.

Tile and coping

Waterline tile and coping are usually quoted as separate lines. Many owners redo them in the same drain.

Spas and features

Attached spas, steps, benches, tanning ledges and waterfalls add area and detail work.

Repairs found

Cracks or hollow spots found after draining may need repair before the new finish goes on.

Drain and refill

Draining and cleaning runs about $600 to $650 in national cost guides. A hose refill usually costs $100 to $250 in the Phoenix metro, or $1,000 to $2,000 by water truck.

Get a price for my pool

Where these numbers come from: Shasta Pools Phoenix cost guides (2026); Shasta Pools (January 2026) and ASP North Phoenix on Arizona finish lifespans; HomeGuide pool resurfacing cost guide; HomeGuide Pebble Tec cost guide; Homewyse acid wash and resurfacing estimates; Pool Research coping cost guide; Pebble Tec on finish lifespan; Pool and Spa News on bond coats and chip-outs (2012). Prices are ranges, not quotes.

Questions

Cost questions

How much does it cost to resurface a pool in Phoenix?

Phoenix-area ranges are about $4,000 to $8,000 for white plaster, $7,000 to $10,000 for quartz and $7,000 to $15,000 for pebble. Pool size, prep work, tile and water features move the final number.

Is pebble worth the extra cost over plaster?

Pebble costs more up front but usually lasts much longer, often 20 to 30 years in Arizona versus 7 to 10 for plaster. If you plan to stay in the home, the cost per year often comes out lower.

Does the price include new tile?

Usually not. Waterline tile and coping are quoted as separate lines. Ask for them itemized so you can decide on each.

Why do quotes for the same pool differ so much?

Contractors differ on prep. A bond coat goes over the old surface, while a full chip-out removes it, which is needed when there are several old layers or widespread hollow spots. Ask each one what prep is included and why.

Before you decide

Planning guides

Get a real price for your pool

Spring dates go fast, so it pays to book early. It takes about a minute to ask.

Start my free quote
Get my free quote